Adjustable Dual Footwear & Wrist Strap Tester - with Relay for access control
The PGT120 will test both feet, independently & simultaneously, reducing pass-through rates of personnel.
Adjustable Test Ranges for Footwear Tester
2 x independent stainless...
ESD Work Check:
A simple, portable indicator that is a 'one-touch' method of checking to see if an operator has continuity, e.g. to the conductive / dissipative work-surface via:
A wrist strap
''ESD'' Footwear, albeit Foot-Straps or Shoes / Boots
It ...
Wrist Strap Tester:
Hand-held
0.75 to 35 Meg Ohm range - system test of strap / coil cord / person
Red low fail neon
Green pass neon
Red high fail neon
Accepts 4mm jack plug & 10mm snap
Requires 9V battery (included)
Can be upgraded to a WST2 or WST3
Meets IEC 61340-5-1...
Wrist Strap Tester:
Wall mountable support plate
0.75 to 35 Meg Ohm range - system test of strap / coil cord /person
Red low fail neon
Green pass neon
Red high fail neon
Accepts 4mm jack plug & 10mm snap
Requires 9V battery (included)
Can be upgraded to a WST3 - see b...
WST3 Wrist Strap & Footwear Tester:
Wall mountable with stainless steel footplate
0.75 to 35 Meg Ohm range - system test of strap / coil cord or footwear /person
Red low fail neon
Green pass neon
Red high fail neon
Accepts 4mm jack plug & 10mm snap / footwear
Requir...
Dual Footwear & Wrist Strap Tester
The WST3-2F will test both feet simultaneously, but independently, reducing pass-through rates of personnel.
There are 3 modes of operation:
Wrist Strap Tester only
Footwear Tester only
Wrist Strap & Footwear together
Specifications:
...
PGT120 with Data Terminal and Label Printer
Wrist strap & footwear test station, which consists of a PGT120, Data Terminal and a Label Printer, records the Personnel Grounding Tester's measurement data. Test values and measurement data can be stored on a network & printed on...
Wall-Plate Assembly:
Converts a WST1 to a WST2, and further to a WST3, with the addition of a Foot-Plate Assembly (WST-FPA)
Wall mountable back-plate
Slave plate with 2 x 10mm snaps & 2 x 4mm jack sockets
Newson Gale Cen-Stat Sole-Mate ll Footwear Tester
The Sole-Mate ll is designed to test personnel footwear resistance before entering a hazardous area. There is an integral relay for remote access activation, e.g only a "Pass" will unlock an access door, etc.
The tester measures the resi...