Grounding Straps & Accessories
Your item has been added!
'L' Shaped Grounding Bracket - 3 x 10mm Snap
Ideal for fitting under bench, etc.
Accepts 3 x 10mm snaps
Used for wrist strap / coil cord, secondary ground connection, etc.
Each with a 1 Meg Ohm resistor
1.5m of cable terminated with eyelet
How about an ''out of the...
"L" Shaped Grounding Bracket: • Ideal for fitting under bench, etc.• Accepts 2 x 4mm jack plugs and 1 x 10mm snap• Used for wrist strap / coil cord, secondary ground connection, etc.• Each with a 1 Meg Ohm resistor• 1.5m of cable terminated with eyeletHow about an ''out of t...
CADSTAT Adjustable Wrist Band - 4mm Snap:
Often referred to as an "antistatic strap", but is actually "conductive" around the inside & insulated around the outside, allowing for the wearer to be "grounded" via a "coil or curly cord" that contains at least a 1 Meg Ohm resistor for OH&S ...
Premium Field Service Kit:
Comprises of:
Blue Mat - 600 x 600mm dissipative workmat with 2 pockets
Wallet / pouch to hold the lot.
Fabric wrist band
3.6m coil cord
Common point grounding cord with 4mm jack plug termination & croc' clip
Not heat resistant ... use ...
CADSTAT Common Point Ground Cords:
See table below for sizes
Dual moulded ends for maximum strain relief
1 x 10mm male snap on top
1 x 10mm female snap & 1 x 7mm female snap for connecting to the mat
2 x 4mm jack plug sockets
Terminations - see above
Eyelet - CPG107-2J...
Dual-Line Coil Cord:For use with Dual-Line Constant Monitors, e.g. SM2, M200, M220, M240, etc
• Two-layer insulation for low loss / minimal signal leakage, i.e. PVC inside / PU outside• Dual moulded snap ends for maximum strain relief• Dark Blue• Option of 2 x 4mm, 2 x 7mm or 2 ...
CADSTAT Cleanroom Adjustable Jewellery Grade Stainless Steel Wrist Band - 10mm Snap:
Often referred to as an "antistatic strap", but is actually "conductive" around the inside & insulated around the outside, allowing for the wearer to be "grounded" via a &qu...
