You need a fully Groundable / ESD / Conductive / Antistaic floor, but it's for a tempory location ... or you just can't lift & grind the existing floor material ... time make matters difficult & you'd like to do it yourself ...
We have a great solution to just that ...
EC (Electrostatic Conductive) tiles are typically < 106 Ω and enable grounding through wheels, footware, etc, to IEC6134-5-1- & ANSI/ESD S20.20 for Static Control / ESD protection ...
There is an example of the installation process below in the CLX Tiles Installation Video Guide ... for details on Copper Grid Configuration and Grounding Considerations, please contact the office.
AVAILABILITY: Quartz (mid grey), Adula (light grey) & Niagara (light blue) are usually stocked, subject to stock turnover; please contact us for confirmation.
Tiles:
Nominal tile size: 608 x 608 x 10.5mm.
Nominal weight: 4.4kg each tile.
No conductive glue, but the optional copper strip grid is recommended.
Dovetailing system remains hidden under surface - option to weld the tiles.
Simple and clean to cut and fit with typical woodworking tools, e.g. Jigsaw, Hand Saw, Circular Saw, Drill, etc.
Minimal dust, emissions, disturbances & construction site like conditions with grinding / preparation when gluing - business can pretty much continue, minimising down times.
Genuine Colorex tiles on top with reliable, proven surface quality.
High tolerance to heavy dynamic loads - suited for rough industrial environments which are subject to frequent traffic.
Can be removed, re–used, recycled - 2nd use respect for the environment.
Load Guide:
Powered pallet truck and forklifts:
total weight up to 2.5 t with hard wheels
total weight up to 5 t with air-filled tyres.
Static loads: 50 kg/cm2
Dynamic loads: 90 kg/cm2
Ramp Edge:
Colour: similar pattern to tile
Nominal dim's: 1220 x 150 x 10mm (easiliy cut to custom length)
10mm Press Stud Options & Fitting Kit
PS10-FK
Fitting kit
Revolving hole punch pliers
2 part press stud assembly tool
Idea for installing PS10-M or PS10-F in bench mat, etc.
PS10-M
10 mm male snap
2 piece set - 1 x post + 1 x male snap-ring
Rivet...
Self-Ahesive Copper Tape
10mm x 0.08mm x 20m Roll (nominal)
Self-adhesive with silicon backing
For grounding / earthing grid or strip, e.g. required for grounding Conductive or Dissipative flooring, bench tops, etc.
Straight Cord 10mm Domed Snap to 5mm Eyelet - Black, Single Moulding
Adjustable Dual Footwear & Wrist Strap Tester - with Relay for access control
The PGT120 will test both feet, independently & simultaneously, reducing pass-through rates of personnel.
Adjustable Test Ranges for Footwear Tester
2 x independent stainless...
Modular Antistatic & Conductive Antifatigue Matting / Runner:
See table below for options
This CADSTAT® rubber based mat is 'Groundable' via either a 'stud' & grounding cord (part # SCE10 or SCE10D) or through surface contact onto a Conductive or Dissipative floor. Th...
ABEBA ESD Footwear
Abeba footwear has been created to meet the demands of a wide range of industries from Electronics & Hazardous Areas to Restaurants & Hospitals ... and more.
The "ESD" range has been designed to meet grounding and testing requirements for use ...
Cleanroom Disposable Overshoe
Cleanroom class ≥ 10,000 compatible
Blue non- woven material
Textured sole for grip
Conductive ribbon: carbon coated polyester
One size fits all: 35 - 48
Pack of 100
Complies with EN 61340-5-1
IMPORTANT INFORMATION
Do not w...