Weller Volume Extraction
Your item has been added!
x
Please sign in
Don't have an account? Create one now
WFE2S 2 Port Volume Extraction UnitThe Weller WFE2S extraction unit purifies the air at up to two workplaces. It is designed as a central system directly at the workplace. A powerful, maintenance-free pump provides continuous fume extraction at a maximum air extraction rate of 230 m3/h. A built-in m...
Volume Fume Extraction Kit:
Static Control / Antistatic / ESD safe
Up to 140 cubic metres an hour airflow
610 x 460 x 210mm (HxWxD)
3-speed suction
1 or 2 port intake
Quiet, typically 40 to 52 dB(A) at 1m
2 x conductive 1.45m x 55mm dia flexible extractor arms
2 x condu...
WellerFT Zero Smog EL Kit 1 Alfa Fume Extraction System
The Zero Smog EL Kit 1 fume extraction unit is set up for a single workstation. However, as the fume extraction unit has 2 ports, by simply adding another arm & nozzle you can cater for 2 workplaces.
The unit com...
WellerFT Zero Smog 2 Fume Extraction Unit
The WFTZS2 fume extraction unit is easy to install and operate. It is designed as a small, economical central system for two workplaces. The Zero Smog 2 is available in as a kit or can be custom configured.
Economical unit purifies air...
WellerFT Zero Smog 2 Kit 2 Alfa Fume Extraction System
The Zero Smog 2 Kit 2 is designed as a small, economical central system for 1 or 2 workplaces. The system consists of the WFZS2 extraction unit, 2 semi-flexible conductive extraction arms 1.5m long with table clamps and 2 Alfa nozzles.
&...
WellerFT MG100 Fume Extraction Unit
The WFTMG100S fume extraction unit is suitable for applications with a high demand of gases. Variable speed and alarm function for filter exchange can be set via the remote control. To make installation easier, the WFTMG100S can be suspended at the work table...
WellerFT MG140 Fume Extration Unit
The WFTMG140 is suitable of applications with a high demand of gas and particle filtration, e.g. soldering, adhesives, clean room work. It can be placed and be moved easily between different work places. Variable speed and alarm function fo...
Weller Zero Smog 4V Fume Extration Unit
The fume extraction unit Zero Smog 4V (WFTZS4V) is easy to install and operate. It is designed for use as a small central system. A powerful, maintenance-free turbine provides continuous fume extraction at a maximum air extraction rate of 230 m3/h. With s...
Replacement MEK Filter for MG100
Suitable for WFTMG100, FIL-MG100-S, Micro / Gas filter for solvents eg MEK, IPA , etc for FIL-MG100S.
Note: The lifespan of the filter will depend on the solvent, particle size & count, input heat and application.
Nominal dimensions: 390 x 180 x 35...
Replacement Standard Filter for MG100
Suitable for FIL-MG100-S, WFTMG100-55, etc, high performance filter for a broad-band / high range of particles and gases from lead-free solder fumes, solvents, adhesives, etc., including Cyanoacrylate / "Superglue".
3-stage fi...
WellerFT Zero Smog 6V Fume Extration Unit
The fume extraction system Zero Smog 6V (WFTZS6V) is user-friendly with quick and simple installation and filter exchange. It has a low noise emission level and is small and convenient to locate within the work area. The high quality components used in ...
WellerFT / Filtronic Fume Extraction Accessories
Weller FT / Filtronic fume extraction units are not only highly customizable, but also have a large range of accessories, e.g. Nozzles, Arms, Hoses, Clamps, etc. If you don't see here what you're after, please contact the office and someone...
