Pen Probes

PEN PROBE KITS

The Pen Probes work with most megohm meters, electrometers and other high potential resistance meters, e.g.SRM3000, SRM100, etc., for measuring Surface Resistance/Resistivity and Volume Resistance of materials with physical dimensions too small for regular concentric ring or other probes. The size, portability and construction make these probes convenient for auditing small samples of materials in the field and yet their design specifications make these instruments precision enough for laboratory environments.

All Pen Probes use spring loaded electrodes with conductive rubber boots to ensure intimate contact with hard/irregular surfaces and reduce contact resistance and the BNC to banana jack adapter allows connection to most popular meters in the market. 

Electrodes are field-replaceable, spring-loaded, pogo-pin type ATE-quality probes that are made of beryllium copper with minimum 60 micro-inch hard gold.

• SPP1-P: The Single-Point Pen Probe can be used for measuring volume resistance of small planar material samples per the requirements of ANSI/ESDA 11.12 or measuring resistance to ground of materials or component to the relevant reference. Connection is via a standard 4mm banana jack.
  
  
• SPP2-PP: The Point-to-Point Pen Probe for surface resistance measurements, generally conforms to the guidelines as outlined in the ANSI/ESDA 11.13 Two-Point Resistance Measurements. Connection is via a BNC/2 x 4mm banana jack adapter, that is included in the kit.
  
  
• SPP3-CR: The Concentric Ring Probe allows for surface resistance/resistivity readings of planar materials. Connection is via a BNC/2 x 4mm banana jack adapter, that is included in the kit.
• SMP1-PP: A Portable Point-to-Point Pen Probe with an integral LED array from 10³ -10¹²Ohms. Requires a 9V battery (included)

#statico